, Singapore

Measurement solutions for coal power plants

The impressive safety and efficiency of modern coal power plants can only be maintained through careful attention to the operating conditions in all stages of the process.

Instruments and systems are available for
• monitoring coal transport, storage and preparation
• maximizing efficiency of coal-fired furnaces and boilers, and
• ensuring emissions compliance.

Many different technologies can be used and, while none is ideal for all situations, there are some applications where a specific technology offers a clear advantage.

Coal Preparation, Storage and Transport
A 600 MW baseload station requires several thousand tons of coal per day. From coal stockpile through to boiler pulverizers, there are many transfer points and storage areas that must be monitored for the onset of spontaneous combustion. If these areas are not properly monitored, the plant could risk unexpected physical and monetary losses along with possible shutdown.

To reduce sulfur emissions, there has been a move in recent years from more traditional bituminous coal to sub bituminous coal, such as Powder River Basin (PRB) coal. PRB coal has a tendency to react with oxygen in the air and a self-heating nature. This has resulted in fires at facilities that previously had excellent safety records. Many facilities that have transitioned to PRB coal are finding that increased monitoring is required to assure safe and continuous operations.

Hot inclusions on coal or coke conveyors can go undetected before causing substantial damage. Traditional methods such as visual inspection or single-point pyrometers often are unable to detect hot spots on a moving conveyor. A high-speed infrared scanning system provides the most reliable and accurate method for continuous monitoring of emerging hot spots. This effectively reduces downtime and eliminates costly conveyor belt repairs.

A high-speed scanning system samples thousands of temperature points every second. Temperature measurements are sent continually to a dedicated processor that can trigger an alarm or signal the conveyor operator to take corrective action. At the heart of the system is a compact, high-speed line scanner that has a minimized depth and base “footprint” for installation in restricted spaces. A durable sapphire window provides reliable protection for the system’s optics.

There are three places where a scanner can be used:
1) Above the belt carrying the coal that will detect hot inclusions on or close the surface
2) Looking at the curtain of coal that falls at the end of one section of belt to another. The curtain of coal of falling coal is more transparent to allow a scanner to see deeper into the coal and detect hot inclusions
3) Under a belt just after a transfer point. The freshly uncovered belt will have a thermal fingerprint of any hot items that were jest resting on its surface.

These systems are small enough to be positioned under a belt just beyond the point where the material has been transferred. They will measure the entire belt surface and alarm if any areas are above a safe temperature. Alarms can be used to trigger water sprays or suppression systems. Alternatively, they can be positioned above the conveyor to monitor the material to determine hot spots and prevent hot items from being loaded and transported.

Coal storage piles can be monitored by infrared thermal cameras that are typically mounted above and to the sides of storage piles and frequently are operated by pan and tilt motorized mounts. In this way, they can be programmed to patrol the surface of the coal storage piles to detect developing hot areas before they become a problem. Systems typically have embedded logic that ignores hot vehicles that may be operating in the areas of the pile to minimize the possibility of false alarms.

Inside pulverizing coal mills and silos, carbon monoxide (CO) monitoring provides earlier detection of combustion to prevent mill fires. These detection systems are specifically designed to continuously monitor the atmosphere inside pulverizing mills and silos. They respond quickly to any significant increase in CO levels and take preventative action before there is damage to a plant or injury to personnel.

The detection systems extract sample gases from the mill (often the mill outlet) or silo and continuously monitor the CO level. Alarm threshold levels can be set to best suit the plant’s individual operating conditions. The settings can compensate for externally introduced CO, where mills use recycled combustion gases for coal feed heating. Oxygen measurement also is an option for fire prevention in oxygen-limited silos and for plants that use recycled flue gas and need to continuously monitor oxygen levels.

Combustion Process
Maintaining safe and efficient combustion requires many monitoring functions in the boiler. The dynamic nature of the process requires that the key products of combustion are monitored and controlled on a real-time basis. Parameters such as furnace exit gas temperature, oxygen and combustibles (CO2, hydrocarbons, etc.) are key indicators of boiler efficiency, slagging and NOx production.

Gas analysis systems can be installed from the furnace entrance to the stack exit. Analyzers that utilize various technologies can be used to measure a wide range of emissions including O2, CO, CO2, CH4, NO, NOx, SO2, sulfuric acid dew point and opacity/dust concentration.

Oxygen and combustibles analyzers are ideal for combustion control and NOx reduction. A side-by-side comparison of these analyzers has demonstrated their improved reliability and better response versus conventional oxygen-only insitu probes. In addition, the hot-wire catalytic detector used by Thermox displays reduced drift and increased sensitivity to low-level CO changes, while better resisting the poisoning effects of SO2.

Infrared technology provides a proven non-contact method for furnace exit gas temperature measurement. This can be used as a tool in reducing NOx emissions and indicating possible boiler slagging conditions.

Thermal imaging inside high-temperature, refractory-lined furnaces and boilers often requires large openings in the refractory wall to view critical areas. This can result in significant heat loss as well as difficulty keeping the opening free from debris.

Those drawbacks can be eliminated with fixed thermal imaging systems that use a rugged infrared camera to accurately profile furnace temperature through a small opening in the wall. The camera is specifically designed for high-temperature furnaces. Its lens is water cooled and air purged and able to withstand temperatures up to 2192oF. It is designed to provide a wide angle view inside the furnace and is unaffected by hot CO2 and H2O found in most combustion atmospheres.

Typical Applications-Combustion
(Refer to Illustration A)
Combustion Process 1—Transfer Point Hot Spot Detection, Non-contact infrared thermal imager
Combustion Process 2—Coal Mill CO Detection, Continuous carbon monoxide detection system
Combustion Process 3—Furnace Exit Gas Temperature, Non-contact infrared imaging system
Combustion Process 4—Furnace Exit O2/CO, Combined oxygen and combustibles analyzers
Combustion Process 5—Economizer Outlet O2 /CO Economizer Outlet O2

Post–Combustion Emissions Control Devices and Stack Emissions
Emission control to meet regulatory constraints is accomplished by a combination of combustion process control and emission reduction equipment. Monitoring analyzers provide essential feedback for optimizing the process.

UV-based SO2 analyzers are considered the standard for accuracy in testing for sulfur emissions. A rugged single- or multi-component analyzer can be integrated into a Continuous Emissions Monitoring (CEM) system or used alone. It can be configured to measure most gas species that absorb in the UV, such as NOx, H2S and SO2

Highly accurate and reliable non-contact opacity and dust monitors provide continuous monitoring to ensure emissions compliance. These sophisticated systems incorporate a patented “no moving parts” optical technology to ensure the most accurate and reliable stack opacity measurement and dust concentration monitoring available.

Portable sulfuric acid dewpoint monitors have been developed specifically for coal-fired systems that require periodic monitoring. This measurement helps maintain boiler efficiency, prevent corrosion and evaluate the effectiveness of fuel additives and changes in combustion conditions.

These lightweight, easy-to-use instruments capture and store thousands of readings and require only simple field maintenance. They assure coal boiler operators that the optimum operating temperature is maintained—just above the sulfuric acid dewpoint—where no sulfuric acid is being formed and combustion efficiency is maximized.

Typical Applications-Post Combustion
(Refer to Illustration B)
Post-Combustion 1—SCR Inlet NOx, UV-based multi-component gas analyzer
Post-Combustion 2—SCR Outlet NOx, SCR Outlet Acid Dewpoint Temperature, Air Heater Inlet O2, UV-based multi-component gas analyzer, hydrocarbon dewpoint analyzer, combined oxygen and combustibles insitu analyzer
Post-Combustion 3—Air Heater Outlet O2, Combined oxygen and combustibles insitu analyzer
Post-Combustion 4—ESP Outlet CO; ESP Outlet Opacity/Dust, UV-based multi-component gas analyzer, Non-contact continuous dust and opacity monitoring system
Post-Combustion 5—Stack Compliance Opacity/Dust Concentration; Stack Compliance SO2; Stack CEM Wet/Dry O2, Non-contact continuous dust and opacity monitoring system, UV-based multi-component gas analyzer, Continuous Emissions Monitoring/ Oxygen Analyzers

 

Richard Gagg, Derek Stuart and Randy Hauer of AMETEK Process & Analytical Instruments 
 

Join Asian Power community
Since you're here...

...there are many ways you can work with us to advertise your company and connect to your customers. Our team can help you dight and create an advertising campaign, in print and digital, on this website and in print magazine.

We can also organize a real life or digital event for you and find thought leader speakers as well as industry leaders, who could be your potential partners, to join the event. We also run some awards programmes which give you an opportunity to be recognized for your achievements during the year and you can join this as a participant or a sponsor.

Let us help you drive your business forward with a good partnership!